Water Cooled Chiller System
-
Wide working temperature range , temperature range: 5~30℃.
2. Piston (MITSUBISHI/ TECUMSEH BRAND)/ Scroll(COPELAND / SANYO BRAND) / Screw type compressors(HANBELL / BIZTER BRAND) for choose
3. Eco-friendly & energy efficient
4. Shell and tube evaporator and shell and tube condenser configuration for increased efficiency
5. Stainless Steel storage tank with insulation pack
6. Schneider electrical
7. Water cooled chiller System working with cooling tower and another pump
Products Introduction
Water-cooled chillers are closed-loop refrigeration units that utilize cooling towers and cooling water circuits for heat dissipation. Employing chilled water as the medium, they provide a stable cold source for industrial processes or air conditioning terminals. Compared to air-cooled models, they offer higher energy efficiency and lower noise levels, but require a dedicated cooling water system.
Advantages: High coefficient of performance (COP), 15%-20% higher than air-cooled systems; low noise (no high-power condenser fan); stable operation with minimal impact from ambient temperature fluctuations.
Quality assurance
Our product components guarantee 100% new, never use any second-hand parts
Safety Protection Functions
Compressor Overload/Overcurrent Protection
Water Shortage/Water Cut-off Protection
Anti-Freeze Protection
Phase Sequence/Phase Loss Protection
Exhaust Temperature Overheat Protection
Water Pump Overload Protection
Automatic Fault Diagnosis + Alarm Display
Customizable
Cooling Capacity: From small units (several kW) to large industrial units
Voltage: 380V/415V/460V/480V, 50/60Hz
Temperature: Ambient 5~20℃ / Low-temperature -5℃/-10℃/-20℃/-30℃
Special models: Explosion-proof, corrosion-resistant, quiet operation, dust-free, PLC remote control, etc.
Products Use
Water cooled chiller system widely used in laser technology, welding plastic molding, injection molding, extrusion, blow bottles, hot LiSu type;Mechanical machining, the machining, casting;Surface treatment, electroplating, electrophoresis,Medical equipment, medicine production, electronics, circuit board production, electronic chip manufacturing;Chemical industry, papermaking, pharmaceutical industry, food processing industry;Aluminum, aluminum alloy, toughened glass, coated glass production.Ultrasonic erase, jewelry processing;Leather, fur processing, printing ink production;Aquaculture and other industries, etc.
Accessories Overview
Semi-hermetic Screw Compressor
The compressor adopts a dual energy adjustment mechanism that can be flexible according to customer needs, effectively reducing energy consumption and saving energy.
Thermal Expansion Valve
Precisely controls the flow of refrigerant into the evaporator based on cooling demand, optimizing system efficiency and temperature regulation.
Filter-Drier
Removes moisture and contaminants from the refrigerant, preventing ice blockages, corrosion, and system damage while maintaining refrigerant purity.
Accumulator
Stores excess refrigerant to accommodate varying cooling loads, stabilizes system pressure, and ensures consistent refrigerant supply during operation.
8-Hour Pre-Shipment Testing
Every water-cooled chiller undergoes continuous 8-hour full-load operation testing before shipment. This comprehensive evaluation covers refrigeration performance, temperature accuracy, operational noise, electrical safety, and system pressure.
Only after passing these comprehensive, rigorous tests and confirming no abnormalities will the unit be packaged for shipment. This ensures the equipment is ready for immediate installation and use upon arrival at the site, delivering long-term stable operation for worry-free and hassle-free customer use.
FAQ
Q: What is the maintenance cycle for a water chiller?
A: The maintenance cycle of a water chiller varies depending on the type of equipment, usage environment, and maintenance requirements. Generally speaking, it is recommended to clean, inspect, and maintain the water cooler every 6-12 months to ensure its normal operation and extend its service life. The specific maintenance cycle should be determined based on the equipment manual and actual situation.
Q: What are the main differences between water-cooled chillers and air-cooled chillers?
A: Water cooled chillers cool the refrigerant through water circulation, while air-cooled chillers cool the refrigerant by blowing air through the condenser through a fan.
Q: How to determine if a water-cooled chiller needs maintenance?
A: When the equipment produces significant noise, reduces cooling efficiency, leaks refrigerant, and other abnormal situations, it indicates the need for maintenance.
Q: Does the cooling water of the water-cooled chiller need to be replaced?
A: The cooling water of a water-cooled chiller needs to be replaced regularly. Long term use of the cooling water can produce impurities, which can affect the heat dissipation efficiency of the cooling water.
Q: Do you test all your machines before delivery?
A: Yes, we promise we will test and take a maintain all machines before delivery in customer's hand.
Hot Tags: water cooled chiller system, China water cooled chiller system manufacturers, suppliers, factory, Industrial Water Cooled Chiller, chiller ac cooler, scroll air cooled water chiller, Water Chiller Cooling System, Industrial chiller plant, Water Chiller