Products Description
Mold temperature controller
Water cooled chiller mold temperature controller, precise control of mold temperature, improve product performance and output.
Advantages
Higher Energy Efficiency: Evaporative cooling in towers delivers better heat rejection than air.
Longer Service Life: Stable operating conditions extend lifespan by ~30% vs. air-cooled.
Quieter Operation: No large condenser fans; suitable for noise-sensitive areas.
Stable Performance: Less affected by high ambient temperatures.
Scalability: Ideal for large cooling loads (e.g., skyscrapers, factories, data centers).
Limitations
Higher Initial Cost: Requires cooling tower, pumps, and water treatment.
Water Consumption: Evaporation in towers needs makeup water and treatment to prevent scaling/corrosion.
Space Requirements: Needs mechanical room and outdoor tower installation.
Technical parameter
|
Item & Description |
Water cooled chiller |
|
|
Model |
MG-40W |
|
|
Cooling capacity |
KW |
120kw,Evaporator temperature 5 ℃ |
|
kcal/h |
100000 |
|
|
Power supply |
380v/50hz/3ph |
|
|
Input power |
kw |
30 |
|
Supply wiring |
16 m2 standard copper core, 4 cores + 1 |
|
|
Refrigerant |
Type |
R407c |
|
Type of control |
Expansion Valve |
|
|
Compressor |
Type |
hermetic scroll type |
|
Power |
10HP*4 |
|
|
Qty |
4 |
|
|
Evaporator |
Type |
Shell and tube evaporator |
|
Chilled water flow (m3/h) |
30-35 m3/h |
|
|
Chilled water outlet&inlet |
DN80 |
|
|
Condenser |
Model |
Shell and tube |
|
Cooling water flow (m3/h) |
50m3/h / Cooling tower required 50T |
|
|
Outside Water pump |
Required about above 5 kw |
|
|
Water tank (L) |
350L |
|
|
Inside water pump |
3KW |
|
|
Inlet outlet water temperature |
3℃- 35℃ |
|
|
Protector |
High and low pressure ,overload ,anti-phase ,compressor over temperature ,fusible plug,automatic temperature switch protection,etc. |
|
|
Cooling water temperature |
≤45℃ |
|
|
Cooled water inlet & outlet size |
DN80 |
|
|
Cooling water inlet & outlet size |
DN80 |
|
|
Automatic water size |
DN20 |
|
|
Dimension |
L *W*H(mm) |
1800*1100*1650mm |
|
Set Weight |
kg |
950 |
Contact us for more technical detail or other model detail.
Air cooled vS water cooled chiller
|
Feature |
Water-Cooled |
Air-Cooled |
|
Heat Rejection |
Cooling tower (water evaporation) |
Ambient air (fans) |
|
Efficiency |
Higher (COP 4.0–6.0) |
Lower (COP 2.5–4.0) |
|
Installation |
Complex (tower, pumps, treatment) |
Simple (no auxiliaries) |
|
Space |
Indoor chiller + outdoor tower |
Outdoor-only |
|
Water Use |
High (evaporation + makeup) |
None |
|
Lifespan |
Longer (20–25 years) |
Shorter (15–20 years) |
|
Best For |
Large loads, continuous operation |
Small-to-medium, water-scarce areas |
Need me to draft a technical datasheet snippet for a water-cooled chiller (including capacity, COP, and pump specs) for your project?
Client case
Hot Tags: Mold temperature controller, China Mold temperature controller manufacturers, suppliers, factory, air cooled chiller with flow meters, air cooled chiller for expanding market share, air cooled chiller with expansion valve, air cooled chiller with receiver tank, Air Cooled Industrial Water Chiller, air cooled chiller with quick start function