The film blowing machine is very effective in its usefulness. It can satisfy different needs to different degrees. It is mainly composed of extruder, die head, die head, cooling equipment, foam stabilizer, herringbone plate, traction roller, Take-up equipment and other components. Energy saving can be divided into two parts: one is the power part and the other is the heating part. Nowadays, most of the frequency converters are used. The energy saving method is to save the residual energy of the motor. For example, the actual power of the motor is 50Hz, and in practice, you only need 30Hz to produce, and the excess energy consumption is wasted. The frequency converter is to change the power output of the motor to achieve the effect of energy saving. However, most of the energy saving in the heating part is the use of electromagnetic heaters, and the energy saving rate is about 30%-70% of the old resistance coils.
ABA film blowing machine is used for: blowing high and low pressure polyethylene film (LDPE, HDPE), products are widely used in composite film, packaging bags, agricultural masking film, textiles, clothing bags and other packaging, the main motor uses frequency conversion speed control, increased The main engine is stable and can save electricity. The traction frame adopts the lift type, which can maximize the film cooling effect. With the development of skills, products are also being updated in different ways, so that we are better satisfied with our needs.