The operation of the air compressor system is very safe. Dangers rarely occur, but in rare cases they can occur due to human error. In order to reduce the possibility of human error, the following safety items must be kept in mind:
① Read the operating instructions carefully. By carefully reading the user operation manual provided by the manufacturer, understand the working conditions of each component of the compressor.
②Before starting the machine each time, carefully check the external status of the pipeline, joints, various control parts and the entire system. It is forbidden to use it when there is a problem.
③Use a suitable power socket. Using an improperly grounded socket can cause damage to the electrical parts. A well-grounded three-head socket must be used.
④Always ensure that the surface of the compressor is dry when it is working. The compressor should be placed in a place with dry, clean flowing air. Avoid splashing dust, dirt and diffuse paint mist on the surface of the compressor.
⑤Most compressors can be turned on and off automatically, and the power supply must be cut off when the equipment is repaired.
⑥Be careful not to touch working parts with your hands. High-speed rotating parts can injure the human body. Care should be taken to remove the handle when the compressor is working. Don't wear large clothes to prevent being caught by rotating parts. Take care to unplug the power plug before servicing the compressor.
⑦Do not remove the protective cover of the transmission belt, ensure the reliable connection of other safety protection devices, and pay attention to keep them in good working condition. Remember that the temperature of the compressor is extremely high when it is working, so do not touch the body.
⑧ Care should be taken when releasing high-pressure air. Use an air pressure regulator to lower the air pressure. High-speed airflow will blow up dust and other foreign objects.
⑨Avoid knotting of the air pipe, and be careful not to let the air pipe, power cord and external wiring touch sharp objects, spilled chemicals, engine oil, and damp ground. All of this leads to danger.
⑩When removing the pressure of the gas storage tank, moving the gas pipe or changing the pneumatic tool, make sure that the reading value of the pressure regulator meter is zero. Note: Do not release the high pressure gas too quickly, otherwise it will cause danger.