Maintenance Method Of Screw Air Compressor?

1. Air filter maintenance and replacement Under normal circumstances, 1500-2000 hours to replace a filter, if the air environment is dirty, you need to shorten the replacement interval time. 2. Maintenance and replacement of lubricating oil For the most commonly used oil injection screw air compressor, the main role of lubricating oil is three: lubrication, cooling, sealing. The quality of the oil has a decisive impact on the performance of the oil injection screw air compressor, good oil has good oxidation stability, rapid separation, good bubble clearing, high viscosity, good corrosion resistance, therefore, it is recommended to use the original special screw oil. 3. Maintenance and replacement of oil filters For oil filters, the new machine should be replaced after 300-500 hours of operation. The second recommendation is to replace it after 2000 hours of use, and it is recommended to replace the new filter element every 1500-2000 hours. 4. Maintenance and replacement of oil and gas separator Generally, when the pressure difference between the oil and gas separator before and after separation exceeds 0.12MPa, the filter element must be replaced, otherwise it will cause motor overload and oil and gas separator damage. Delayed service will not only save money, but will waste expensive electricity due to the increase in current.